China Hot selling 75kw/100HP Industrial Screw Air Compressor & Rotary Air Compressor at-100A wholesaler

Product Description

Product Description:

The screw air compressor is composed of a pair of parallel and intermeshing female and male screws. It is the most widely used rotary compressor.
There are 2 types of single-screw and twin-screw. Generally speaking, the CZPT refers to the twin-screw compressor. It was first proposed by the German H. Krigar in 1878. It was not until 1934 by A. Lysholm of the Royal Institute of Technology in Sweden that the technology was established, and it began to be applied in industry and achieved rapid development.

Product Photo:

Product Specification:
 

Model AT-75A AT-100A AT-120A AT-150A AT-175A
Air Delivery (m3/min)/ Pressur(Mpa) 10.0/0.7 13.4/0.7 16.2/0.7 21/0.7 24.5/0.7
9.6/0.8 12.6/0.8 15.0/0.8 19.8/0.8 23.2/0.8
8.5/10 11.2/1.0 13.8/1.0 17.4/1.0 20.5/1.0
7.6/12 10.0/1.2 12.3/1.2 14.8/1.2 17.4/1.2
Cooling Method Air Cooling
Lubrication Volume(L) 65 90
Driving Mode Direct Driven
Voltage 220-440V;50/60Hz
Power(KW/HP) 55/75 75/100 90/120 110/150 132/175
Start System Variable Frequency Starting
Size(cm) 176*126*156 176*126*156 240*148*185
Weight 950 1050 1200 1800 2200
Outlet size 2″ 2″ 2&1/2″

Product Parameters:

Product Details:

New generation of high-efficient Airend
1.Advanced and energy saving spiral tooth-type technology.
2.New Type 5:6 asymmetrical rotator tooth type.
3.Power increased by more than 5%-10% in air dischage when compared to other ordinary machine.

High -efficient power system
1.The motor is energy saving and efficient, the bearing is used SKF.
2. The protection class of motor up to IP55 and insulation of F level, the efficiency can be increased for abut 5%.
3.The motor is low noise,low in vibratio and smooth in operation.

Coupling Transmission
1.Motor aligns the rigid coupling of the host automatically, and adopts imported elastic coupling, damping vibrates at impact,to ensure that the transmission is totally effective,without energy loss.
2.Direct link design,screw host engine and motor have low center of gravity,reduce the noise source and vibration source,and enhance the stability of the unit.

High Efficient oil and gas speraration system
with the world famous brand apoda oil and gas sperarator, reduce the oil content of the compressor exhaust gas and the oil content of the unit power consumption is only 1-2PPM.

Intelligent control system
1.Multi-Language can be switched according to your requirement.
2.With protection functions up to 12 types, such as overload,short circuit,low temperature, over voltage and so on.
3.Simply and clear, easy to operate.

Product Installation Diagram:

Product Application:
Workshop Display:

Our Advantages:

Factory Overview:

Global Market:

FAQ:

1.Q:Can you provide the samples to us?
    A: yes, we can provide the sample to you in free, but the cost of the freight on your account.

2. Q:Can you do the order according to the customer requirement?
     A:Yes, we can do the order according to your sample or drawings, OEM/ODM service provided.

3. Q:What is your delivery time?
    A:Normally, it’s 7 days if the goods are in stock. It will  takes about 15-25days if the goods are not in stock, Mainly depends on the order quantity.

4.Q:What is your terms of payment?
    A:Generally 30% value of goods as deposit, balance amount against the copy of the BL.

5. Q: How long is the warranty ?
     A: 14 months since the container shipped except quick-wear parts.

After-sales Service: 14 Months
Warranty: 14 Months
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type
Samples:
US$ 7500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air-compressor

what to see in an air compressor

If you need to buy an air compressor, you should know what to look for. The types of air compressors on the market are classified according to their CFM rating, safety devices, and pumps. There are several differences between lubricated and oil-free air compressors that you should know before buying. To better understand the difference between these types of air compressors, read on. This article will guide you through these differences.

Pump

If you are looking for a quality air compressor, you have come to the right place. A good air compressor pump will provide high pressure for anything from tires to boats and more. There are hundreds of different models to choose from, and the great thing about buying one from a Chinese manufacturer is that they have so many options. More importantly, Chinese manufacturers can customize air equipment such as air compressors at low prices.
A good quality air pump won’t break easily, but you’ll be able to use it for years. Choosing a high-quality pump will help you avoid many hassles on the road, such as unplanned downtime and installation costs. Plus, a pump from the same manufacturer as your air compressor is your best bet to ensure optimum performance. Listed below are some tips for finding a quality pump for your air compressor.
The air compressor is an important but unremarkable invention. Without them, our lives would be completely different. Without a pump, we can’t get hot water from central heating, nor can we get heat from the refrigerator. We can’t inflate bicycle tires, and we can’t refuel cars. Pumps are vital to all kinds of machines. So why is it important to choose the right product? The answer may surprise you.
Different types of pumps are used for different applications. Positive displacement pumps move a fixed volume of fluid and direct it to a drain. This design ensures constant flow at a constant speed regardless of discharge pressure. Centrifugal pumps work differently. The impeller accelerates the fluid, converting the input energy into kinetic energy. This type of pump is most commonly used in mines, air conditioning, industrial plants, and flood control.

safety equipment

There are several safety features you should check when using an air compressor. First, check the connection of the air filter to the air. If they come loose, parts may separate and cause injury. Another important safety feature is the shut-off valve. When working near compressed air, the shut-off valve should be within easy reach and visibility. Moving parts and other equipment must be protected with protective covers. Check safety valve and replace damaged parts.
Rupture discs are copper discs located on the air cooler. When the air pressure exceeds a certain limit, it bursts. Fusible plugs contain materials that melt at high temperatures. The compressor should have a lubricating oil pressure alarm and cut off the trip signal. If these two safety devices fail, the compressor should be stopped immediately. The rupture disc should be inspected at least weekly to ensure it does not rupture under pressure.
If the pressure level is too high, and overcurrent protection device cuts power to the motor. It also automatically shuts off the compressor when the hose ruptures or the air volume exceeds a preset level. The device should be installed on the air compressor to prevent accidents. Its job is to protect the operator from harm. If employees do not follow these safety measures, they may cause equipment damage.
To ensure safety when operating the air compressor, safety glasses and gloves should be worn. Pressurized air can cause eye injury, and crash goggles can provide a barrier to prevent this. Additionally, the self-retracting cord prevents trip hazards and reinforces excess cord. You should also keep your hands and body away from the air nozzle. This will prevent you from being sprayed with compressed air.

CFM Rating

An air compressor’s PSI and CFM ratings indicate the pressure and volume it can deliver. PSI stands for pounds per square inch and measures the force and pressure contained in one square inch of air. These two indicators are equally important when choosing an air compressor. If you need a lot of compressed air for a specific application, you will need a higher psi compressor. Likewise, if you are using compressed air in a smaller application, a low cfm compressor will not provide enough power to meet your needs.
When comparing different air compressors, be sure to pay close attention to horsepower and CFM ratings. While compressor power is essential for some tasks, it is not the most important aspect. The CFM rating of an air compressor will determine how big a project it can handle and how long it takes to charge. Make sure you understand the CFM and PSI ratings of your future compressors, as not knowing these important statistics can frustrate you and drive up costs.
In general, it is best to choose an air compressor with a CFM rating higher than the size of the air tool. This will ensure that the air compressor has enough pressure to work multiple tools efficiently at the same time. While smaller CFM ratings may be sufficient for smaller projects, larger tools such as drills require a lot of air. Therefore, the higher the CFM, the larger and more powerful the tool.
Once you understand the CFM of an air compressor, you can start looking for the right tool. You can check the CFM rating of your air compressor online by commenting below. If you’re not sure about the size of your air tool, you can always buy a second air compressor. This is a great way to double the CFM of your air compressor! You’ll have more air to do more work, and your compressor will last longer.
air-compressor

Lack of oil and lubrication

Oil-free air compressors have a smaller footprint and require less maintenance than oil-lubricated air compressors. Although oil-lubricated air compressors are more expensive and heavier than oil-free air compressors, they are also ideal for stationary use. The benefits of oil-free air compressors include greater durability and lower maintenance costs. The advantages and disadvantages of each type are discussed below.
Oil-free air compressors are generally quieter than oil-lubricated air compressors. However, you may still experience some noise while using it. To avoid this, you should choose a quiet intake compressor. However, if you work next to a noisy compressor, you should buy a muffler, an aftermarket filter that reduces compressor noise.
If you want to use the air compressor for a long time, the oil-free model is not the right choice. Its Teflon coating wears off over time, especially at extreme temperatures. Additionally, oil-free air compressors have a large number of moving parts that require regular maintenance, while oil-filled air compressors are great for those who don’t want to invest in extra parts.
Another major difference between oil-free and oil-lubricated air compressors is lubrication. Oil-lubricated air compressors require regular lubrication whereas oil-free air compressors are pre-lubricated. They have fewer parts and are cheaper. Oil-free air compressors are lighter than oil-lubricated air compressors. In addition to being more affordable, oil-free air compressors are more powerful and durable.
While oil-filled air compressors are more efficient and durable, they generate a lot of heat. However, they are also more expensive and require regular oil changes. Furthermore, they are difficult to transport. They also need to be permanently installed. These air compressors are also not portable and require a fixed location. So, consider your needs before deciding which type is best for you. When you’re choosing an air compressor for your business, be sure to shop around.
air-compressor

noise level

If you are wondering what the noise level of an air compressor is, the answer depends on your specific equipment and working environment conditions. Typically, air compressors produce 40 to 90 decibels of noise. Although the lower the decibel level, the quieter the compressor will be. Larger, more powerful air compressors produce higher noise levels than their little brothers. But no matter how big the air compressors are, it’s a good idea to wear hearing protection while working around them.
When purchasing a new air compressor, the noise level of the air compressor should be considered. While this may seem like a small problem, there are actually a lot of variations on these noisy machines. The most common type of air compressor is the reciprocating piston pump. This model uses pistons similar to an engine to rotate inside a chamber. The piston moves quickly and traps air proportional to its size. Single-piston air compressors are generally noisier than twin-piston models, also known as twin cylinders.
But even if you have the proper equipment to protect your hearing, it’s still important to know the noise level of an air compressor. Even if the noise is not immediately dangerous, it can still cause temporary or permanent hearing loss. This condition is called noise-induced hearing loss, and an air compressor with a sound level of 80 or higher can cause permanent hearing damage. You can avoid potential damage to your hearing and prevent accidents by simply paying attention to the noise level of your air compressor.
Air compressors are inherently noisy, but if you take steps to reduce their noise levels, you can minimize disruption to neighbors and co-workers. For example, installing a sound enclosure in your work area can prevent your air compressor from making as much noise as before. Depending on your workspace, you can also try installing a long air hose, which will reduce sound levels by up to 25%.
China Hot selling 75kw/100HP Industrial Screw Air Compressor & Rotary Air Compressor at-100A   wholesaler China Hot selling 75kw/100HP Industrial Screw Air Compressor & Rotary Air Compressor at-100A   wholesaler
editor by CX 2023-04-21

Laser compressor

As one of the laser compressor manufacturers, suppliers, and exporters of mechanical products, We offer laser compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of laser compressor.

Recent Posts