China Hot selling CZPT 30HP 16bar 22kw Four-in-One Combined Screw Air Compressor for Laser Cutting High-Pressure Screw Compressor with Good quality

Product Description

Rodlars 30HP 16BAR 22KW Four-in-One Combined Screw Air Compressor for Laser
Cutting High-Pressure Screw Compressor 

This series integrates the main components of air comprssor,dryer ,precision filters and tank to provide our customers
with a “turnkey” solution.
Easy to install and operation,only connect to electricity and air outlet then you could start the machine.The air quality is
highly optimized with its reliable quality and excellent performance,which enables it to meet the needs of most industrial.
Products Description

Product Parameters of CZPT All In One Air Compressor
Model Motor Power  Pressure  Capacity Noise  Level Outlet Pipe Diameter Net Weight Dimensions Air Tank capacity Lubricating oil capacity
KW HP Bar m3/min DB Inch Kgs L*W*H(mm) L L
LS-10AIN4 7.5 10 8 1.2 68±2 G ¾ 300 1600*640*1405 260 6
10 0.95
12 0.8
16 /
LS-20AIN4 15 20 8 2.3 68±2 G ¾ 400 1850*750*1640 300 11
10 1.7
12 1.6
16 1.1
LS-30AIN4 22 30 8 3.4 68±2 G1 660 2050*750*1640 300 16
10 2.9
12 2.8
16 2.1
Remarks:
1.The exhaust volume is measured under the rated exhaust pressure, according to the national standard GB3853 test (equivalent to ISO1217 appendix C).
2.Recommend frequency 30-100%.
3.The above data is based on the standard grid-380V/50HZ.

                   Non-standard customization service support

Please make further inquiry for the non-standard specification type and machines which
  are used under high or low temperature, high humidity,dusty working environment etc.
Details Images

Advantage:
1.4 in1 type, include screw air compressor, receiver tank, air dryer and air filter. 
2.Plug and use, no need installation. 
3.16bar compressed air suit for laser cutting machine, reduce the cost. 
4.Clean air to protect your laser cutting machine. 
5.Stable, reliable, efficiency,low noise, energy saving.

PROTECT YOUR LASER CUTTING MACHINE 
There are 3 lenses in the head of laser cutting machine: 
−Collimator lens: straighten the light beam 
−Focusing lens: Focused the straightening laster 
−Protective lens: Isolate the front 2 lenses from pollution and protect them. 

After our search, the protective lens contacts with compressed air, if there is oil and water, the focused light
will be dispersed, and the cutting efficiency will be reduced. Therefore CZPT 16bar 4 in1 screw air
compressor include 300L air tank, lower pressure dew point refrigerated air dryer and 4 level line air filter to
protect your laster cutting machine, thus to reduce the factory operation cost. 

Company Profile
Luosi Technology Co., Ltd.,one of Biggest Air Compressor Manufacture with 33 years focus
in air Compressor in China.We are specialized in R&D, manufacturing, sales and service of
air compressors and supporting equipment.With over 20,000 square meters morden workshop,
one whole digital inspection line, 3 air compressor line, all with advanced automatic production equipment.We have air compressor technology research and development, manufacturing, quality, logistics, operation, marketing, and after-sales service departments.

Our company mainly produces screw air compressor, permanent magnet variable frequency air compressor, two-stage permanent magnet air compressor, special laser cutting air compressor,
high and low pressure air compressor, air post-processing equipment (frozen dryer, adsorption
dryer, QPS precision machine, filter, etc.), gas storage tank and supporting parts.Our company
offers variety of products which can meet your multifarious demands. 

We adhere to the management principles of “quality first, customer first and credit-based” since
the establishment of the company and always do our best to satisfy potential needs of our
customers. Our company is sincerely willing to cooperate with enterprises from all over the world
in order to realize a CZPT situation since the trend of economic globalization has developed
with anirresistible force.

Certification

FAQ
Q1:Are you a manufactures or trading company?
A1:We are professional manufacture of Screw air compressor of HangZhou
    (Close to HangZhou) ,33 years of focus in Air Compressor.

Q2:What’s your Delivery Time?
A2:Generally 10days.If it is an urgently or Non-standard order, please contact us in advance.

Q3:How long is your air compressor warranty?
A3:One year for the whole machine and 2 years for screw air end, except consumable spare parts.

Q4:How many Screw Air Compressor do you produce everyday?
A4:We can produce 300 pieces everyday.

Q5:Can you use our brand?
A5:Yes, Both OEM & ODM service can be accepted.

Q6:How long could your air compressor be used?
A6:Generally, more than 10 years.

Q7:What’s payment term?
A7:T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q8:How about the maintenance?
A8:First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q9:How do you control quality ? 
A9:1.The raw materials are strictly inspected 
      2.Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

Payment and Shipping

 

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Hot selling CZPT 30HP 16bar 22kw Four-in-One Combined Screw Air Compressor for Laser Cutting High-Pressure Screw Compressor     with Good qualityChina Hot selling CZPT 30HP 16bar 22kw Four-in-One Combined Screw Air Compressor for Laser Cutting High-Pressure Screw Compressor     with Good quality

Laser compressor

As one of the laser compressor manufacturers, suppliers, and exporters of mechanical products, We offer laser compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of laser compressor.

Recent Posts