China Mini Silent Oil-Free Air Compressor 12v air compressor

Solution Description

Silent oil-totally free air compressor


 

Silent oil-free of charge air compressor adopts oil-free of charge leather bowl sleeve piston technique for air compression.

Operating Basic principle:

Silent: It belongs to a miniature piston compressor. When the crankshaft of the compressor is pushed by the one shaft of the motor, it is pushed by the connecting rod → the functioning quantity fashioned by the inner wall of the cylinder, the cylinder head and the best area of the piston will periodically modify.
Piston action procedure of piston compressor:
When commencing to shift from the cylinder head, the working quantity in the cylinder gradually boosts

The gasoline moves along the consumption pipe, pushes the ingestion valve open up and enters the cylinder until finally the operating volume reaches the optimum, the ingestion valve closes

When the piston of a piston compressor moves in the reverse course, the operating volume in the cylinder decreases and the gasoline strain boosts

When the force in the cylinder reaches and is slightly increased than the exhaust strain, the exhaust valve opens and the gas is discharged out of the cylinder until finally the piston moves to the restrict placement, and the exhaust valve closes.

When the piston of the piston compressor moves in the reverse course again, the above process repeats. That is: the crankshaft of the piston compressor rotates after, the piston reciprocates once, and the approach of air intake, compression, and exhaust is recognized in the cylinder, which completes a functioning cycle. The one-shaft and double-cylinder structure layout helps make the compressor gas stream fee two times that of the solitary-cylinder when the rated speed is consistent, and the vibration and noise management is properly managed.

Technological PARAMETER
 

Design HV-3 HV-5
Hydrogen movement -3000ml/min -5000ml/min
Output strain -.5Mpa -.4Mpa
Pressure security <0.002MPa
Operating sound <35dB(A)
Voltage 220V 50Hz
Power 175W 275W
Dimension 420*250*350mm
Fat 21kg 22kg

Attribute:

1. The output air pressure is steady and without having fluctuation, which minimizes noise pollution. It is appropriate for screening departments this kind of as evaluation and tests, supporting laboratories, laboratories of universities, research institutes, environmental defense, CZPT and epidemic avoidance, and so forth.

two. No oil
The air compressor solves the dilemma of oil output from the output gas, due to the fact it does not need to have to add lubricating oil. It is also outfitted with a drinking water drain to drain the h2o amassed in the gasoline storage tank in time.

three. Constant stream
The air compressor adopts the most current strain decreasing gadget, and the output air is consistent current and stabilized, so that laboratory devices this kind of as atomic absorption have very good reproducibility throughout tests.

four. Lengthy services lifestyle
The air compressor is outfitted with a commence-up preheating unit, the equipment is outfitted with an exterior protector, and the inside of the tank has been internally sprayed. Not only the air compressor is used reasonably, but also it is functional and has a lengthy provider lifestyle.

5. Simple to work
It saves the problems of regularly examining and adding lubricating oil for oil equipment and screw air compressor, typical routine maintenance time is lengthy, and it can operate typically following every day power offer. The operation is basic and does not need to be on obligation.

Device Screen:
 

FAQ

Q1: What is your machine ensure?
A1: Usually the assure time period is 1 yr, and we will keep make contact with with our customers for after-product sales provider. We’re intention to produce far better devices and enable our clients be pleased.

Q2: How can I get quotation?
A2: Deliver your specifications and go away your e mail, we will deliver you quotation quickly.

Q3: If we have difficulties when utilizing your machine, what ought to we do?
A3: If you have any dilemma, just make contact with us, we will aid you to fix it, and if essential, we will organize our engineers to help you in your nation.

Q4: What about the delivery strategies?
A4: For urgent purchase and light excess weight, you can decide on categorical: FedEx, TNT, DHL or EMS for heavy bodyweight, you can select by air or by sea to help save expense.

Q5: What’s your delivery time?
A5: Typically we produce inside of 7-15days right after the payment verified. It is also rely on the equipment, if need to customize the device as your need, the making time is lengthier.

Q6: Which sort of payment method you can accept?
A6: T/T. Western Union, L/C.

US $500-1,500
/ Piece
|
1 Piece

(Min. Order)

###

Hydrogen Flow: 0-5000ml/Min
Output Pressure: 0-0.4MPa
Pressure Stability: <0.002MPa
Working Noise: <35dB(a)
Voltage: 220V 50Hz
Power: 275W

###

Model HV-3 HV-5
Hydrogen flow 0-3000ml/min 0-5000ml/min
Output pressure 0-0.5Mpa 0-0.4Mpa
Pressure stability <0.002MPa
Working noise <35dB(A)
Voltage 220V 50Hz
Power 175W 275W
Dimension 420*250*350mm
Weight 21kg 22kg

###

Mini Silent Oil-Free Air Compressor Mini Silent Oil-Free Air Compressor
US $500-1,500
/ Piece
|
1 Piece

(Min. Order)

###

Hydrogen Flow: 0-5000ml/Min
Output Pressure: 0-0.4MPa
Pressure Stability: <0.002MPa
Working Noise: <35dB(a)
Voltage: 220V 50Hz
Power: 275W

###

Model HV-3 HV-5
Hydrogen flow 0-3000ml/min 0-5000ml/min
Output pressure 0-0.5Mpa 0-0.4Mpa
Pressure stability <0.002MPa
Working noise <35dB(A)
Voltage 220V 50Hz
Power 175W 275W
Dimension 420*250*350mm
Weight 21kg 22kg

###

Mini Silent Oil-Free Air Compressor Mini Silent Oil-Free Air Compressor

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China Mini Silent Oil-Free Air Compressor     12v air compressorChina Mini Silent Oil-Free Air Compressor     12v air compressor
editor by czh 2022-12-28

Laser compressor

As one of the laser compressor manufacturers, suppliers, and exporters of mechanical products, We offer laser compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of laser compressor.

Recent Posts