China supplier 15kw 20 HP Four-in-One Integrated Portable Oil Injected 16bar Single Screw Air Compressor with 500L Air Tank for Fiber Laser Cutting with Good quality

Product Description

1. Performance characteristics :
Our 8bar air compressor has air dryer, 300L air tank and precision filter of laser cutting machine (integrated air compressor). Its control panel adopts intelligent microcomputer control technology, which can monitor the whole machine in all directions according to your instructions, and realize unattended operation by remote control.
With Air-dryer, Air Tank and filter.
Our 8 bar air compressor adopts rotary oil filter to completely remove the impurities in the lubricating oil, which is convenient to replace and free of oil stains. Secondly, the 8 bar air compressor has low temperature difference design, increases heat exchange area, and is suitable for high temperature and humidity working environment. In addition, it is designed as a fully enclosed static sound box with sound-absorbing sponge attached to the box, which can effectively absorb noise and make the noise much lower than that of similar compressors. The overall structure is reasonable and the maintenance is convenient.

2.Compressed Air Solutions:
All the professionalism you need to have your correct supply of AIR(Air Volume, Air Pressure and Air Quality)

• When it comes to air (you need it, we have it).
• Piston compressors Cast Iron, Aluminum.
• Screw compressors, and all compressor accessories.
• Motors, Air Pumps, Regulators, Filters, Dryers, after coolers and so on.
• Our Heavy Duty Air Compressors with a sense of(Quality saves your cost)
• Unique Design and Engineering, special Machining Standards.
• Skilled labor for assembly line, backed up with technical support worldwide.
 

 

Model No. HDG-VPM15 HDG-VPM22
Rated Discharge Pressure      Mpa 1.55 1.55
Rated Discharge Capacity  m3/min 1.2 2.2
Exit Temperature of Rear Cooler ºC ambient temperature+15 ambient temperature+15
Air Inlet/Outlet   G3/4 G3/4
Motor Cooling Type   /air cooled /air cooled
Driving Mode   /integrated /integrated
Air Tank Volume L 400 400
Suction Gas Type Temperature       ºC ≤40 ≤40
Pressure     kg/cm2(A) 1.033 1.033
Relative Humidity     % 60 60
Main Motor Power         HP/kW 20/15 30/22
Speed         rpm 4900(326Hz) 3400(226Hz)
Starting Mode   /Variable Frequency /Variable Frequency
/Voltage /Frequency V/Hz 380V/130-326Hz 380V/90-226Hz
/Protect Level   IP54 IP54
Insulation Class   F F
Fan Motor Power        KW 0.15 0.46
Speed (50Hz)        rpm 1350 1300
/Voltage /Frequency V/Hz 380V/50HZ 380V/50HZ
Air Dryer Model No.   TR02-HD TR02-HD
Power   KW 0.52 0.52
Rated Holding Air Capacity m3/min 2.4 2.4
/Voltage /Frequency V/Hz 220V/50Hz 220V/50Hz
The Inlet Gas Temperature≤ ºC 65ºC 65ºC
Run Parameters Unloading Pressure Mpa 1.55 1.55
Recovery Loading Pressure Mpa 1.4 1.4
Starting Pressure of Safety Valve Mpa 1.76 1.76
Stop Protection Temperature ºC 110 110
Product Size(L*W*H) mm 1730X780X1640 1730X850X1840
Product Weight kg 400 450

FAQ

Q1: Are you the manufacturer or trading company?
A1: We are the manufacturer.

Q2: What the exactly address of your factory? 
A2: Shimi Industrial Road, Xiuli Road, Xihu (West Lake) Dis. Town, Xihu (West Lake) Dis. County, HangZhou City, ZheJiang Province

Q3: Warranty terms of your air compressor machine? 
A3: One year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the air compressor? 
A4: We offer all kinds of products related to air compressor. (Air dryer, Air tank, etc)

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes,OEM orders are our mainly service.

Q7: What is the advantage about your company?
A7: Our company has professional team and professional production line.

Q8: If we travel to China to checking your facility, are you welcome?
A8: Of course, why not? We will provide the whole accompany from you landing in China. Only Give us a call before your arrive. We will pick up you from the airport, living in our company’s hotel, and driving by car take you visiting our company. Warm Welcome!

Q9: What’s the terms of trade?
A9: FOB,CFR,CIF or EXW are all acceptable.

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China supplier 15kw 20 HP Four-in-One Integrated Portable Oil Injected 16bar Single Screw Air Compressor with 500L Air Tank for Fiber Laser Cutting     with Good qualityChina supplier 15kw 20 HP Four-in-One Integrated Portable Oil Injected 16bar Single Screw Air Compressor with 500L Air Tank for Fiber Laser Cutting     with Good quality

Laser compressor

As one of the laser compressor manufacturers, suppliers, and exporters of mechanical products, We offer laser compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of laser compressor.

Recent Posts