Merchandise Description
Product Description
Merchandise Specialized Description
| Product :Ā | Ā Energy Saving Collection (EPM) |
| Variety:Ā | Oil Injected Long term MagneticĀ Screw Compressor |
| Voltage:Ā | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P orĀ Customerā²s Requirements |
| Doing work Force:Ā | seven~13bar |
| Installed Motor Energy:Ā | 15~110Ā Kw |
| Colour:Ā | Blue |
| Driven Approach: | Taper ConnectionĀ Direct Driven |
| Air Stop:Ā | OriginalĀ Ally-winĀ Air EndĀ from Germany. |
| Trademark:Ā | SCR |
| Transport Deal:Ā | Standard Wood Packing |
| Available Certification:Ā | CE,Ā ISO,Ā UL,Ā ASME, GHOST |
| Origin:Ā | ZheJiang , China |
| software: | Ā Casting,Metallic,Plastic,Rubber |
Product Functions
one. China-Japan most recent technological innovation cooperation, substantial reliability.
two. Oil CoolingĀ Everlasting Magnetic Motor.
3. IP65 defense grade & heavy responsibility air filter, suitable for large dusty atmosphere.Ā
four. IE4 EfficiencyĀ motor effectiveness.
five.Max.RPM 1500,reduced noise,higher efficiency,much better life-span.
six.Ā Most vitality preserving mode,Ā Only function at loading.
7. Wide frequency variety 30%-a hundred%.
8.Ā PremiumĀ Magnetic content resist far more than 180ĀŗC temp.
nine. Dependable PM motor provider from Italy.
ten. Direct Taper connection, no transmission electricity loss, effortless upkeep.
11.Contact Display PLC with preset managing plan, much more clever handle.
12. Precise VSD technology manage.
thirteen.Ā Easy for set up and support.
14. Fantastic Vitality Saving, help save up to far more thanĀ 30-40%.
Specially designed PM motor:
The PM motor performance is even larger than IE3 premium effectiveness motors. The motor uses large performance magnetic components providing numerous advantages this sort of as bearing cost-free procedure, grease free servicing, direct 1:1 coupling without having transmission losses, reduced noise and low vibration foremost to a compact framework.
Increased Strength Savings:
When demand from customers is lower the PM minimal pressure compressor to begin with minimizes the speed to maintain the appropriate circulation demand. If the air desire stops the compressor enters standby method, conserving even more strength. The compressor automatically restarts and operates when the force drops underneath its setpoint.
The newest technology intelligent touchscreen controller:
SCR’s most recent touchscreen interface permits easy clever management for your compressor. Pressure and scheduling instances can be effortlessly programmed allowing you to routinely start and end the compressor to match manufacturing times. Remote operation and true time monitoring are developed in the controller as regular.
| Design | SCR90EPM-seven | SCR90EPM-8 | SCR90EPM-10 | |
| Capacity/Strain(m3/min,/BAR) | twelve.7/7 | 12.5/8 | 12.3/10 | |
| PMĀ Motor | Electrical power(KW) | 63KW(90H.P) | ||
| Velocity(r/min) | 1500 | |||
| StartingĀ way | VSDĀ Startup | |||
| Volt(V) | 380/four hundred/415(220) | |||
| MotorĀ safetyĀ grade | IP54 | |||
| MotorĀ isolationĀ grade | F | |||
| ElectricalĀ Supply | 380(four hundred,415)V/50Hz/3Phase,Ā 220V/60HZ/3P | |||
| OutletĀ Temperature(ĀŗC) | ā¤Ā EnvironmentĀ Temperature+10ĀŗC | |||
| DrivenĀ way | DirectĀ Driven | |||
| NoiseĀ levelĀ atĀ 1Ā meter | 76Ā±3dB(A) | |||
| CoolingĀ method | AirĀ cooling | |||
| OilĀ content | 1~3Ā ppm | |||
| OutletĀ Connection | RcĀ 2 | |||
| Dimension | Duration(mm) | 2300 | ||
| Width(mm) | 1350 | |||
| Peak(mm) | 1500 | |||
| Weight(KG) | 1800 | |||
Product Categories
Benefits
Software
About SCR
FAQ
one What trade phrases do we supply? What type of settlement currency do we supply?
Trade term :CIF ,CFR ,FOB,Ex-Functions As significantly Our business traded in Bucks ,Euros and RMB .
2 How long is our shipping and delivery?
Our standard supply time is 30-forty times after confirmation purchase & getting recipets for standard compressors, for the other non common necessity will be reviewed situation by case.
3 What is the voltage of the compressor?
The accessible voltage include 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the identical time we supply other voltage in accordance to consumer requirement.
four Can our compressor run in higher temperature environment? What is the doing work temperature selection for our device?
Sure ,our machine would run in higher temperature surroundings ,until finally now our products have been sold to numerous nations which wouldmeet substantial temperature in summer time ,this kind of like Iraq, Saudi Arabia, Egypt, Algeria, and so forth. Work temperature assortment :1-forty five ĀŗC(33.8ĀŗF-113ĀŗF)
5 What is actually the min. Get requirement ?
Min. Buy prerequisite is 1PCS.
|
US $20,000-150,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Help Check |
|---|---|
| Warranty: | Two Years |
| Lubrication Style: | Oil-free |
| Cooling System: | Oil Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
###
| Samples: |
US$ 30000/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model : | Energy Saving Series (EPM) |
| Type: | Oil Injected Permanent Magnetic Screw Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements |
| Working Pressure: | 7~13bar |
| Installed Motor Power: | 15~110 Kw |
| Color: | Blue |
| Driven Method: | Taper Connection Direct Driven |
| Air End: | Original Ally-win Air End from Germany. |
| Trademark: | SCR |
| Transport Package: | Standard Wooden Packing |
| Available Certificate: | CE, ISO, UL, ASME, GHOST |
| Origin: | Shanghai, China |
| application: | Casting,Metal,Plastic,Rubber |
###
| Model | SCR90EPM-7 | SCR90EPM-8 | SCR90EPM-10 | |
| Capacity/Pressure(m3/min,/BAR) | 12.7/7 | 12.5/8 | 12.3/10 | |
| PM Motor | Power(KW) | 63KW(90H.P) | ||
| Speed(r/min) | 1500 | |||
| Starting way | VSD Startup | |||
| Volt(V) | 380/400/415(220) | |||
| Motor safety grade | IP54 | |||
| Motor isolation grade | F | |||
| Electrical Supply | 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P | |||
| Outlet Temperature(ºC) | ≤ Environment Temperature+10ºC | |||
| Driven way | Direct Driven | |||
| Noise level at 1 meter | 76±3dB(A) | |||
| Cooling method | Air cooling | |||
| Oil content | 1~3 ppm | |||
| Outlet Connection | Rc 2 | |||
| Dimension | Length(mm) | 2300 | ||
| Width(mm) | 1350 | |||
| Height(mm) | 1500 | |||
| Weight(KG) | 1800 | |||
|
US $20,000-150,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Help Check |
|---|---|
| Warranty: | Two Years |
| Lubrication Style: | Oil-free |
| Cooling System: | Oil Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
###
| Samples: |
US$ 30000/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model : | Energy Saving Series (EPM) |
| Type: | Oil Injected Permanent Magnetic Screw Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements |
| Working Pressure: | 7~13bar |
| Installed Motor Power: | 15~110 Kw |
| Color: | Blue |
| Driven Method: | Taper Connection Direct Driven |
| Air End: | Original Ally-win Air End from Germany. |
| Trademark: | SCR |
| Transport Package: | Standard Wooden Packing |
| Available Certificate: | CE, ISO, UL, ASME, GHOST |
| Origin: | Shanghai, China |
| application: | Casting,Metal,Plastic,Rubber |
###
| Model | SCR90EPM-7 | SCR90EPM-8 | SCR90EPM-10 | |
| Capacity/Pressure(m3/min,/BAR) | 12.7/7 | 12.5/8 | 12.3/10 | |
| PM Motor | Power(KW) | 63KW(90H.P) | ||
| Speed(r/min) | 1500 | |||
| Starting way | VSD Startup | |||
| Volt(V) | 380/400/415(220) | |||
| Motor safety grade | IP54 | |||
| Motor isolation grade | F | |||
| Electrical Supply | 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P | |||
| Outlet Temperature(ºC) | ≤ Environment Temperature+10ºC | |||
| Driven way | Direct Driven | |||
| Noise level at 1 meter | 76±3dB(A) | |||
| Cooling method | Air cooling | |||
| Oil content | 1~3 ppm | |||
| Outlet Connection | Rc 2 | |||
| Dimension | Length(mm) | 2300 | ||
| Width(mm) | 1350 | |||
| Height(mm) | 1500 | |||
| Weight(KG) | 1800 | |||
Choosing an Air Compressor
Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.
Positive displacement
There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses two lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other one to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.
Oil-injected
Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these two air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
Oil-free
When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in one minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.
Single-stage
A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses two valves – one for inlet and one for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is one that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
Low-noise
A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase one with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise one is an excellent choice.
editor by czh 2022-12-02